Mods
12 inch sundown sa12 in a 6th order bandpass box wrapped in sued, powered by a sae1000d sundown amp.\r
I have starlight head liner inspired by Rolls-Royce.\r
Underglow under side of car grill and under dash.\r
Carbon fiber bumper splitters.
I have starlight head liner inspired by Rolls-Royce.\r
Underglow under side of car grill and under dash.\r
Carbon fiber bumper splitters.
Build story
I'm building this car with intentions of a clean and simple vip build.\r
\r
The head liner had to be fully removed and each fiber optic cable glued down one by one un reveled then put together cleanly by having every 12 inches with electrical tape. \r
\r
The sub box was built in kind of a rush but still took 6 hours to do sued and all I do plan on building another and getting a much bigger 12 inch sub. \r
\r
The underglow took time to install as well (3 hours) its held by 3m tape and tabs to hold it down as well. All the wiring is tucked under the plastic fender covers and tucked throughout the engine bay as well.\r
\r
The carbon fiber bumper splitters are held down by 3m tape and riveted to the bottom of the bumper.
\r
The head liner had to be fully removed and each fiber optic cable glued down one by one un reveled then put together cleanly by having every 12 inches with electrical tape. \r
\r
The sub box was built in kind of a rush but still took 6 hours to do sued and all I do plan on building another and getting a much bigger 12 inch sub. \r
\r
The underglow took time to install as well (3 hours) its held by 3m tape and tabs to hold it down as well. All the wiring is tucked under the plastic fender covers and tucked throughout the engine bay as well.\r
\r
The carbon fiber bumper splitters are held down by 3m tape and riveted to the bottom of the bumper.