Mods
Not finished yet frame up rebuild\r
4in suspension lift \r
Custom air horn set up with on board air\r
4bt Cummins with zf5 speed \r
Twinstick 205 transfer case \r
Air dog fuel pump\r
Bigger injectors, now signal turbo but fabing a set of compounds \r
Alot more yet to do but work in progress
4in suspension lift \r
Custom air horn set up with on board air\r
4bt Cummins with zf5 speed \r
Twinstick 205 transfer case \r
Air dog fuel pump\r
Bigger injectors, now signal turbo but fabing a set of compounds \r
Alot more yet to do but work in progress
Build story
I've had this truck since I was 16, was a run down old farm truck. I wanted to bring life back in to this truck. I started with a ground up rebuild. Rear half of the frame was junk, I had a donor truck and I cut and replaced the rear half of the frame. My donor truck also had a dana 60 rear with 3.54s so I swapped that in as well. Frame was then scraped and painted\r
all bushing were replaced along with most suspension parts. Both front and rear axles and the transfer case were totally gone through with breaks gaskets and seals. In the process of now going through the engine building a set of compounds and would like to tare it further apart and do a cam headstuds and go through the head
all bushing were replaced along with most suspension parts. Both front and rear axles and the transfer case were totally gone through with breaks gaskets and seals. In the process of now going through the engine building a set of compounds and would like to tare it further apart and do a cam headstuds and go through the head