Level Up the Nilight lighting system on Truck

1- after I read all the comments, I decided to make my own cable. 12awg for car instead of that 16.
With 12 I tested it on for 1 hour under 30 degree sun light and no cable became warm.
2- I also bought a better relay brand.
3-I did open both side and sealed the rubber with high temperature silicone. Then I sealed the front glasses 4 sides. Mine will not take water in its now a fact.

The cable to the switch is short but I manage to have enough even with my batterie connector on the left.

I also installed a better switch.
Mine is hidden under the grill. I made sire all was leveled before I fix it cause the screw to adjust the light hight angle are is a bad place.
It is brighy enought. Is it 450 watt lol I dont think so
Mine is 3 inches ressens behind therefore less bright on sides and still it is a lot.
It is very low on my grand cherokee lower than the fog light and its a good thing.
In winter I will probable install an amber plexiglass color on it or the snow réflexion would be too much white.
I am really happy for now. But my trust comes from all I did to make it better.