Mods
14” fox coil overs, 3 link with a pan hard bar, custom 9/10” front axle housing from Brink Fab of Red Deer Ab , mounted 4” forward, Yukon 3rd member, Detroit locker, Dana 60 Kingpin outers, Yukon 35 spline chrome moly axle shafts, Yukon 35 spline locking hubs, 350 ci SBC, MSD Atomic EFI, Borg Warner T19 4 speed, Lakewood bell housing, Novak adapters output & flange to a Dana 300 T case,True Hi 9 rear 3rd member w/ spool 4:57 ratio, fish plated frame, hydraulic clutch from Novak, custom disc brakes front & rear, body/tub, dash & fenders from Aqualu in Kelowna - 5/32” Aluminum, Speed hut speedometer & tach, SW gauges, PSC hydraulic assist steering cylinder, ported J10 steering box, PSC power steering reservoir. An aluminum radiator from Northern Radiator.
SOA YJ 2.5” rear leaf springs
The best parts… Carbeau heated seats! 😂
SOA YJ 2.5” rear leaf springs
The best parts… Carbeau heated seats! 😂
Build story
I had a heart attack in June 2021 midway through the build, the widow maker! I’ve gone through a separation… my Adult step children still want me to be a grandparent to their children… and my own daughter are all supportive of me…
Started collecting parts 2017, worked on it for 5 years off and on in 4 different friends shops.
Painted by, Intenze Auto Styles of Innisfail Alberta.
I did all the welding & fabrication myself, rebuilt & assembled all the mechanical & electrical myself. I farmed out the machine work… to Western Canadian Rockwell, Industrial Machine Shop & Gen X Machine all from Red Deer Alberta.
I’m sure I’m missing some of the modifications I done and some parts I added…
I do off road it! I’ve hauled it to Jaffray BC, and to the eastern slopes of the Rocky Mountains west of my home about 1.5 hours. I’m a member of the local Jeep club, Red Deer Packrats.
I’m excited to be building my shop in the Spring 2024
Started collecting parts 2017, worked on it for 5 years off and on in 4 different friends shops.
Painted by, Intenze Auto Styles of Innisfail Alberta.
I did all the welding & fabrication myself, rebuilt & assembled all the mechanical & electrical myself. I farmed out the machine work… to Western Canadian Rockwell, Industrial Machine Shop & Gen X Machine all from Red Deer Alberta.
I’m sure I’m missing some of the modifications I done and some parts I added…
I do off road it! I’ve hauled it to Jaffray BC, and to the eastern slopes of the Rocky Mountains west of my home about 1.5 hours. I’m a member of the local Jeep club, Red Deer Packrats.
I’m excited to be building my shop in the Spring 2024