Mods
HE221W Cummins Turbo, .280 Injectors built by Jarod March, TekMekTonics Tuned, Jeep/F-150 Lift Kit, Stage 4 Clutch with G60/VR6 flywheel, 225/65/16 Tires, BEW Lift Pump, Cat 1r-0750 Fuel Filter, Ebay Front Mount Intercooler, 4 Bar Map sensor, Euro Fog headlight and switch, Dieselgeek Shifter Bushing kit, Straight Pipe Exhaust
Build story
This car initially started out as an 01 Tornado Red Jetta, I had a tie rod snap going around a corner and put it into a ditch tweaking the frame. I found this silver 02 Shell with a blown motor and auto transmission, and decided to swap my motor and trans into the car over a weekend. Thankfully that went smoothly other than cruise still not working but it runs and drove with no issues. I had already had the injectors installed back in the red car before I swapped into the silver one. About 5 months after the swap I ended up popping 2 factory VNT-15 turbos in a week being aggressive with it. This brought on the need for an upgrade, so an HE221W turbo along with supporting mods were installed. It now pushed 30-40 PSI of boost and has been super reliable. (Other than me lifting the head from all the boost)
Lighting
Euro Fog lights
Powertrain
G60/VR6 Flywheel Kit
Stage 4 XTD Ebay Clutch
Electrical
TekMekTronics Tuned
Fuel System
BEW Lift Pump
Cat 1r-0750 Fuel Filter
Injectors by Jarod March
Suspension
XJ/JK Jeep Springs
F-150 Shocks
Cooling
Ebay Front Mount Intercooler
Boost
HE221W Cummins Turbo