2004 Dodge Ram 3500 4x4 Dually Diesel

2500 fix-up

Twin stacked ram

1st gen 5 speed

Super dodge

Cummins compounds build

Minty 2002 Cummins with more miles than the Mississippi

MUNIN

1998 ram 2500 12v 4 door

Putting the ve pump back on the 93 dodge d250

new  font doors.

5.9 cummins high efficiency/performance/longevity  biuld

Goliath

The dodge

Red ryder

W250

Diminishing Returns

Ron Burgandy

Gramps

Long bed Larry

Dirty diesel

Joseph’s 2000 ram 2500 cummins

Shelby the old red truck

Carlll

1998 Dodge Ram 3500 dually

Dodge ram 2500 2001

2005 Dodge Sprinter Dualy TALL LONG

Grunt

cyl 6.  The damage a small piece of ring will do.

clean and ready block, refreshed at the machine shop

the dull grey on the timing cover lip is a bit of jb weld as a previous person has ground that area down, probly when taking off gasket material, which caused a leak they filled with silicone.  the jb weld filled a the gap a bit more solidly but I'm gonna keep an eye out for a replacement that is less that the 200 everyone seems to be asking for that part.  Or it will go to a welding shop to get filled in as it is aluminum.

changing out front springs while the engine is out.

this worked well enough to lift the truck so I could swap out the front springs.

Custom stacks built by me and a couple buddys

The middle one, with the motor home grille because deer.

New wheels, more backspacing to eliminate rubbing

 This is a start to Finnish  post not quite  there yet but it's going to be a great one

 Bumper will change to a modified 4th gen but I painted  this one for now.

Before I cleaned and started working on the interior, sadly this is where I noticed  previous damage I have to repair 

After dash kit.  Next is a sound system and big screen mod

 Only one led that was powerfully from auxito actually fit. These I've found to be a reliable brand.

 Wheels I traded  for my atv,  but needed work, Im Hoping these turn out to be decent rims but likely will sell them and get 22'sx10 wide wrapped with 36's x13.5wide

 Lookk g for the bulge to protect the rim a bit when it goes off road.

 Cast iron head ported to the max, (this head will not be capable  of suporting north of 800hp)  this is die to the sheer amount of material removed. For this particular  head.

Basically  I ported out to the flange  and deep into this with serial specialty bits And contoured and outward flared burrs    

My red 2000 ram 1500 5.9 gas truck before the project. This body went on the cummins truck

front axle had way too much lash, cheaper to replace than repair

Used axle we had laying around off a 94 2500. Had a friend weld some new spring stand plates on

new control arms and stainless brake lines, cleaned and painted coils

More new lines, reused fox shocks from 1500

dual steering stabilizer reused from 1500

Truck had EDGE EZ tuner installed when I bought it

Sport bumper modified to accommodate tow hooks 

Carplay/Android Auto Alpine bluetooth head unit

Custom made machined aluminum brush gaurd

Ram